How about using a straightener for nose or using a gadget to thin your body hair? Sounds crazy and weird? Well then, take a look at these products for these are surely going to stun you.

Mudage Jolie Body Hair Thinner

This one’s a beauty gadget meant especially for men who do not want to get rid of body hair and yet impress their girls. All you need to do is use this gadget on areas where you want the hair to thin down. Surprisingly, you also have an option to comb hair that needs to be thin. Absolutely easy & safe to use, this body hair thinner comes for $ 29. You can use this product on arms & legs, chest and armpit too. Weighing only 20 grams, the body hair thinner measures approximately 45 x 148 x 10 mm.

Hana Tsun Nose Straightener

It is a Japanese Product that actually promises to straighten your nose. You need to clip it into the nostrils and keep it for about 20 minutes every day. What it does is that it helps in pushing & balancing the bones & contours of one’s nose. So what’s the end result? A straighter, sharper, and stylish nose. Made from polypropylene and silicone, this nose straightener is priced at $51.

Anti Wrinkle Glasses

Worried about wrinkles that have started popping up on your face? The Mejikara, or better known as the Anti Wrinkle Glasses, are the ultimate answer to your wrinkle problems. Wearing these glasses for about five minutes in a day helps remove the wrinkles near the eyes and also makes you look more charming & younger. What’s so special about these glasses? Well, these consist of expertly-crafted ridges that help massage your skin.

Nails Dryer

It’s very simple to use this beauty gadget. Once you are done with nail painting, you need to keep your fingers under the tiny tubes and start using the pump with other hand. The tubes emit air which helps dry your nails faster.

Neck Stretcher

Does your chin touch the collar bone? Then, consider this neck stretcher that comes for about $26 or 3000 Yen. Wrap it around your neck and start pumping the air. What happens is that the air pressure elongates the back of your neck completely. And, it’s quite comforting too.

Wine lovers finally have a reason to cheer. Whether it is keeping your wine safe or covering the wine bottle with handsome attire, mentioned below are five such wonderful wine gear that will simply impress you!

Vinderalls

If you want to cover your expensive wine bottle with really cool attire, then go for the Vinderalls. Costing about $11.45, it can also be used as a gift wrap. Be it covering the bottle of pinot grigio or cabernet sauvignon, the Vinderalls just fits perfectly on 750 ml wine bottles. What’s more, it even has a pocket in front where you can place a card or something similar.

Screw You Wine Opener

These wine gear needs a bit of introduction for one look at it and you would understand what it resembles to! With this wine opener by your side, opening the wine bottle is a child’s play. Priced at $9.95, the Screw You Opener can be easily used and washed. Most importantly, it’s dishwasher safe. It even has a foldable corkscrew that easily folds inside the hand when you are not using it.

Magic Wine Bottle Holder

Some great wine bottles are meant to be displayed in an extra-ordinary manner and the Magic Wine Bottle Holder can help you do that. Coming for approximately $ 19.95, you can keep it on a sideboard or even in the kitchen. Besides this, you can even have it as a centerpiece on the table. You can even gift this bottle holder to a friend or relative.

Wall-mounted Bottle Holder

Facing difficulty in storing your wine bottles? Well, then go for the Wall-mounted Bottle Holder and say goodbye to limited space issues. Stylish, elegant and most important space-efficient, the bottle holder will instantly grab the attention of your visitors. Blomus has to be credited for coming up with such a remarkable piece of wine gear. Made from stainless steel with ultra-modern finish, the bottle holder has a vertical rack consisting of 8 lined loops. You can keep your wine bottles sideways by their neck in the most secured manner. Costs only $ 66.59!

Wine Lock

Are you using a marker to measure the quantity of wine left in the bottle? Well, then the Wine Lock is just meant for you. This brilliantly crafted wine gear keeps your favourite plonk secured. So, how it work? The Wine Lock, priced at $24.99, has a padlock consisting of four digits. You can have your own code and each time you open the bottle the code needs to be entered. Do not forget the code otherwise; you will have to break the bottle to get rid of it.

USB Desk Vacuum

Priced at $ 13.49, the USB Desk Vacuum has been specially designed for those who like to keep their work stations clean and tidy. All you need to do is plugin this USB accessory into the USB port and that’s it! It just works fine clearing up the mess on your desk completely. A really cool USB accessory indeed!

USB Beverage Cooler

Like having a chilled can of beer while working on your laptop? Well, then is the ultimate USB accessory for you. The USB Beverage Cooler works like a small fridge and can quickly chill a can. Equipped with a tiny bluish LED inside, the Beverage Cooler keeps your drink cool while you are busy working. Thinking of buying it? Well, you need to shell out $ 29.99 to own it!

USB Portable Chess

Technology, indeed, knows no boundaries. And, the USB Portable Roll Up Chess Game is a perfect example of this. Use this accessory to play chess against your computer or a friend. Its in-built software helps you save, record and even replay games. The software also allows you to indicate moves and even keeps a track of the same. Wondering about the cost? It’s just $ 107.99!

USB Digital Microscope

If you have ever wondered of capturing some amazing videos and pictures, then the USB Digital Microscope could be the answer to your questions. Coming for $74.95, it allows you to capture and display images right your laptop or PC. If you are curious about everything that surrounds you, grab the digital microscope and start collecting best quality, breath-taking pictures. What’s more, the microscope also has a Zoom-In feature. Amazing, isn’t it?

USB Lamp

Taking its inspiration from Star Wars, the USB Lamp is the best way to illuminate your workstation. Priced at $26.24, this USB Lamp is approximately 13 inches in height and its light can be easily adjusted as per different needs. Indeed, it’s a great accessory to add up to your unique Star Wars collection!

1)    The Peyote Paper Camera by Corbis Readymech

The first paper camera we will look at is the Peyote Paper Camera. Touted as one of the best visually abstract cameras, the Peyote camera is capable of producing very pure yet captivating pinhole photographs. All you need to do is to print out the plans, which are available online at no cost. Then cut and paste the camera together and simply follow the given instructions. When you open the shutter, what you are doing is to allow light to enter into the camera box. This will expose the film located at the back. When you are done taking the photographs, then what you end up with are colourful pictures with unbelievable clarity.

2)    Rubikon Paper Camera by HuberoKororo

Rubikon is a paper cutout which becomes a useful and functional camera once the pieces are downloaded, printed and glued together. This cutout paper camera was launched in 2005 and had gained popularity since its inception. It has also been used as a teaching tool in schools and photography institutes. A more updated version known as Rubikon, the Pinhole Rebel was then designed to give a more user-friendly experience. The Rubikon Paper Camera by HuberoKororoisis, a fun, cartoon-like paper had a sliding shutter to enhance ease of use. Loosely based the design on SLR cameras, all you need to do is to focus, and shoot.

3)    Mother Camera by Corbis Readymech

Yet another product by Readymech, this paper camera can also be obtained free. Loosely adapted from vintage cameras of the past century, this paper camera delivers stunning images when used correctly.

4)    Pentax Paper Camera

This paper camera has been touted as by far the most realistic paper camera available in the market. A stunning product, Pentax seems to have developed this paper camera with the intention of taking photography seriously. Although it has not been designed for pinhole photography, all you need to do is poke a hole in the lens. Then slide in a film sheet and take pictures.

5)    Paper Polaroid Camera

This paper camera is not just a pinhole camera. In fact, it is mainly a holder of your Polaroid camera pictures. Nevertheless, you can easily make this a pinhole camera. What you need to do is create a hole so that a pinhole is created. These paper polaroid cameras are great do-it-yourself craft and are perfect in every sense.

Switchblade

Switch blade is a two seated vehicle with three wheels. Designed by Samson motor works, the vehicle can be used as a car and an aircraft. The body of the Switchblade is made from lightweight carbon fiber.  The vehicle stretches out its wings and extends its tail to take off. The controls used for flying can be enclosed under the chassis when the vehicle is grounded. The vehicle uses a 4-stroke engine with a capacity of 1350cc. The shape of the vehicle resembles a buggy and it can reach speeds up to 100 miles per hour. The Company is planning to sell the airplane kit around sixty thousand dollars and the customer should nearly build the 50 percent of the product himself.

Switchblade has serious aerodynamic issues and the flying characteristic of the vehicle is limited due to the inability of the vehicle to be stable in the air. The vehicle gets power for the blades from the motorcycle engine. Moreover, according to experts, the performance of the engine will not be as effective as it is on ground.

Transition

Transition is a high tech flying car designed by Terrafugia. It looks like a sports aircraft while flying. The wingspan measures around 26ft and 6”. The Transition has a wide bumper at the front and the vehicle will not rise above 300ft. The performance of the vehicle is affected by its practical limitations. Normally the wings of an airplane must be maintained at a particular speed and angle to lift the vehicle. As a common practice, the engineers placed the landing gear near the center of gravity of the plane, which allows the plane to take off and land at very slow speed. Like most of the flying cars, the wheels of the Transition are placed within the chassis.

The simulation model suggests that the stabilizers, wheels and the canards hinder the performance of the vehicle. The pilots find it difficult to raise the nose of the vehicle.

The Puffin

The Puffin is an aircraft that can carry only one person. Mark Moore from NASA developed it. The ultimate goal of this vehicle was to take a person to his office. It has two engines which are powered by the batteries which weigh around hundred pounds. It takes off upright from the ground and looks more or less like a bicycle flying. However, people will not prefer to fly in an inclined position.

What’s it all about

Built by Evan Atherton, an Autodesk engineer and LumiGeek creator John Taylor, these 3-D Printed Speakers are sure to keep you spellbound completely! Made with 3-D printed materials costing about $2,200, these speakers have a high-end Connex to print single objects which in turn blend two different materials in contrast to printers that give mono-output. These genius minds have blended rubber along with hard plastic to churn out a pair of wonderful looking speakers. These include strips of RGB LEDs that function with the help of a custom microcontroller. This helps the speakers emit luminescence. The best part is that you can customize the glow of these speakers depending on the tunes.

Impact

This extraordinary set of speakers is all set to take the users’ experience to a whole new level. With its Bluetooth support and Arduino compatible microcontroller, users can easily delineate actions of the LED strip. The contoured object glows in accordance with the beats of the music and this is surely going to amaze its users. However, given the price of its materials, the average consumer can only dream about becoming the owner of such speakers!

It is a unique kind of accessory with blade-nib technology. This set of speaker is supposed to bring in a revolution in the way audio is combined with distinct and eye-catching visual appeasements.

The Steampunk Bracer Arm Attachment is sure to leave you completely stunned. Hand crafted by Skinznhydez’s Ian finch-field, the bracer consists of interchangeable blades that are absolutely light in weight. These blades are especially made from aluminium that equals the quality which is used in aircrafts. The bracer comprises of metals, nuts, bolts, brass, leather, rivets and similar other items. What’s more, it is dyed using eco-flo dyes and finishers. The handle used in the bracer can be moved up and down as per the requirement.  Another interesting thing about this bioshock inspired bracer is that it has a rotating LED consisting of a speed dial and an on/off switch as well. The LED is powered by a 9v battery which lasts for a longer duration.

Dimensions

Talking about the bracer’s dimensions, the wrist measures approximately 5 to 8 inches whereas the forearm measures around 9 to 12.5 inches. It also consists of some buckled straps that can be seamlessly adjusted. Further the length of the bracer is 10 inches. If we measure its blades, the hook is about 10.5 inches and its straight edge is somewhere around 14 inches.

Price & Availability

Initially, the steampunk bracer arm attachment was priced at $1150 but now you can avail it for just $849. Plus, you can also benefit from free shipping! You can buy this breath-taking piece of art at etsy.com. They ship the product worldwide at no extra cost! The creator of this extraordinary bracer must definitely be credited for such a work that involved a lot of innovation, creativity and unending hours of perseverance. Hats off to Skinznhydez’s Ian finch-field who has crafted such a brilliant masterpiece that is not only durable but also chiselled to perfection!

Featuring an appearance that looks more like a technical marvel than a clock, Atmos Hermes blends artistic craftsmanship with pure transparency for an ideal characterization. The exquisite timepiece is based on high standards and has rightly infused fragile vulnerability of crystal with the uncompromising nature of metal. In terms of its delicate yet distinguished fabrication, the luxurious clock integrates a crystal bowl that boasts of a unique movement designed by Les Cristalleries de Saint Louis.

Crafted by the virtue of a double overlay technique, the beautiful Atmos Hermes Clock features a designing performed by six creative glassmakers and encompasses a technique that includes layers of glass coated upon each other. Truly, a classic yet avant garde amalgamation, the timepiece further catches extra attention for its molten white enamel which has carefully been contoured into a ball by the glass-bowler. Although the collaboration between Jaeger LeCoultre and Hermes had revealed first Atmos timepiece decades back in the year 1928, the latest creation vows to differ in many ways – commencing with its eye for extraordinary detailing and purposive components.

However, the light colored glass masses of the timepiece have been shaped into a spherical form by four ingenious master glassmakers – subsequent to which, the layering process of Hermes began. Although the timepiece has advanced technological integration and carries an artistic appeal as well, it gobbled down quite a lot of time and efforts for its final conceptualization.

While the intriguing Atmos Hermes Clock stays highly limited to just 176 units, the quantity of the timepiece produced signifies the number of years that passed since the beginning of Hermes. The clock will be made accessible through Hermes and Jaeger LeCoultre stores around the world. However, the pricing details of Atmos are yet to be disclosed but one could certainly expect a heavy price tag stitched along the sleek chassis of this beautiful creation.

The Anti Cheating Ring is the perfect solution which is a simple looking wedding band that is made out of titanium, however, the ring is engraved from the inside with letters in big type case that spell “IM MARRIED’ which would be embossed around your ring finger after you take it off.  This ring is priced at $550, but it is worth it, particularly if your spouse has a reputation for philandering.  So, if someone who were wearing the Anti Cheating Ring tried to hook up with someone at the bar and pass himself or herself as a bachelor, then the embossed ‘IM MARRIED’ print around the ring finger would definitely give them away!

This ring is currently being marketed and sold by TheCheeky.com which is receiving a lot of flak for this ring. Some people are of the view that the ring is preposterous because marriage does not mean engraving oneself with the ‘I am married’ tag to ensure that they behave appropriately, this is almost like you are defying the objective of marriage.  Some also argue that this ring might have an opposite effect as marriage is not something that would deter philandering.  There are a lot of Hollywood stars and celebrities who have philandered knowing full well of the marital status of one another- did not Angelina Jolie know that Brad Pitt was a much married man, before starting an affair with him?  So, may be this ring might not really have a lot of takers as being married does not guarantee not straying.  Besides, the impressions creating by the Anti Cheating Ring does disappear after some time, so it’s not a ‘long term’ solution anyways.  Despite the arguments, this ring has created quite a stir on Twitter.

Everyone has their own individual take on this matter; however, it is nevertheless a very creative and clever approach to keeping a check on promiscuity that is on the rise these days!  However, make sure that the person you are cheating with is literate enough to read what is engraved on to your ring finger!

The building basically functions around a concept in which the sound kinetic energy is harvested by the ‘cilia; that cover the Soundscraper which are noise sensitive and take in the noise pollution for harnessing clean energy.  This design is an entry at the 2013 eVolo Skyscraper Competition.  These Soundscrapers are proposed to be constructed near major roads and highways, prime locations and railway junctions which receive the greatest volume of traffic and commuter inflows and outflows, so as to harness the noise energy in abundance.  The Soundscraper would have a material called ‘cilia’ which resemble hair-like elements that would cover the entire exterior of the building.  However, the building would have a dual exterior that would have the façade and a metal frame that would contain the ‘cilia’.  Each tower would be having  84 thousand electro-active cilia that would have the capability of picking sound waves emanating from flying planes, pedestrian traffic, trains and cars.  Each one of these cilia would be equipped with Parametric Frequency Increased Generators or sound sensors.  After picking up the noise, the energy harvester would convert it to kinetic energy and the transducer cells would then transform it to electricity which can then be stored or passed onto the electrical grids.

The developers and designers of the Soundscraper project believe that each of the buildings could produce energy to the tune of nearly 150 MW in a populated and busy city like Los Angeles and would therefore be able to suffice 10 per cent of the electricity needs of the city.  This green energy would also reduce the carbon footprint of the city and its increased dependence upon fossil fuels which are non renewable.  Hence, these Soundscrapers would be extremely viable in the busiest metropolises of the world by making these cities self-sufficient in terms of their energy needs.